YMD62 ISO RGB Hot swap PCB (Fully Programmable Support VIA VIAL)

Package Included

Only PCB: 1x Type C 60 PCB (Diodes Resistors switch RGB Underglow RGB Hot socket presoldered) + Switch puller


This plate can use with GH60 type plate which support ISO layout.All universal 60 plate in our store can support it.


Details



The chipset is stm which has 128k flash memory.


PCB is presoldered with Kailh socket and switch RGB leds as well as underglow RGB leds.


PCB is fully programmable with VIA and VIAL software.If you need special functions to be added,inquire us is ok.





Manuals
Just download VIAL software below and then open it,change the keycode directly is ok.No need to reset PCB.


VIAL: drive.google.com/file/d/134pbPlonLtRwuDfBxpeSjdlnG7RoL5by/view?usp=share_link


How to install PCB plate kit


1.Install stabilizers to PCB at first

2.Amount around 5-6 switches onto plate corners and middle part totally

3.Amount these switches pin to PCB socket totally.After PCB plate fixed,plug other switches in around 90 degree is ok.When plugging you can put PCB onto desk which can avoid big damage when plugging switches.

4.If there is any big resistance when plugging switches,especially when you use kailh switches,don’t put it in forcely.Make sure the switch pin is not bent and the switches is around 90 degree.

5.After plugging switches,if 1 or 2 key not working,check the switch pin whether it’s bent at first.Then check whether the back socket is plugged loose.

Even hotswap PCB don’t need to solder as normal,however the socket is easily to be plugged loose or off after many times replacing,so if you can prepare a cheap solder iron in hand,1 hotswap PCB can use for many years.We sold many brand hotswap PCB now,these are experience from many customers.